Tag Archives: repetier-host

Using Slic3r with the Printrbot Simple and Repetier-Host

Seej Bloxen Flag, Basic

I’ll be using a basic Seej bloxen for my slicing demo. It’s more exciting than a test cube and potentially useful should a vigorous Seej match break out at your makerspace. You can never have enough bloxen sitting around. Grab the model here if you want to follow along.

Open the Object Placement tab and click on Add STL File. Navigate to the bloxen model and Slic3r drops it into your build area. The bloxen should be centered, but if it isn’t, you can fiddle with the translation and rotation values, or just hit Center Object. When you’re done it should look like this:

Added Bloxen

Click the Slicer tab (not the Slice with Slic3r button) and then click the Configure button. We have a few settings to adjust.

This is the point in the tutorial where normally I’d walk you through changing a half dozen parameters. Teach a man to fish, Lao Tzu says, and he’ll eat for a lifetime. Screw Lao Tzu. You want your fish now. You can learn to fish in an hour after your belly’s full.

So I’ve zipped up the settings that have been working for me and put them up for download. You can just swap out whatever default settings showed up with Slic3r with the contents of this archive right here.

On OSX, Slic3r stores its settings in three subdirectories within

~YourUserName/Library/Application Support/Slic3r/

You can copy the archive contents into that directory and you should be good to go.

I have no idea where these settings will be saved in Windows. If you’re on Linux, you’ve already written a shell script to slice models using spare cycles from your video card and can stop reading now.

warningWARNING: The usual warnings about destroying your printer by using the code I’ve provided apply. Use these settings at your own risk. You might think about backing up your old settings in a safe place, just in case.

Once you’ve got the settings installed, click the Slice With Slic3r button. You should have a pile of G-Code in your G-Code panel. I’ve been consistently deleting/commenting out a couple of lines from my code and have gotten good results by really babysitting the first layer of my prints.

Delete this Code

If you comment out the code by putting a semicolon in front of it, the printer won’t use it but it’ll still be there for reference porpoises:

;G28 ; home all axes
;G1 Z5 F5000 ; lift nozzle

This assumes that I’ve manually homed my printer by moving the print bed all the way to the right and the extruder arm as far forward as it will go. The hot end should be over the bottom left of the print bed.

If you’ve manually homed the printer, make sure you hit the Set Home button the the Print panel before you print.

I watch the extrusion carefully on the first layer and adjust the Z-axis manually (physically turning the leadscrew with my fancy new Z-Axis Knob) to make sure I get a good adhesion on the painters’ tape. Once I’m satisfied that the first layer is OK I’ll go wash dishes or something while the printer burbles away.
First Layer

Let’s assume everything turned out more or less OK for you and you’ve got a mostly-perfect bloxen sitting on your print bed. Now would be an appropriate time to learn to fish.

Layers and Perimeters

Layer height: I’ve been getting OK results with .35 mm. This is fairly coarse for a machine that claims .1mm resolution on the spec sheet, but for something as plain-jane as a bloxen it’s probably OK. If you get a .35mm layer bloxen to work, try a higher resolution on a more complicated model. This Magic: The Gathering Beast Token is a great detail test.


I leave this density at .25 when printing with PLA unless the object’s going to undergo physical stress. If I go much lower I find that the top layer of PLA tends to sag too much for my tastes.

Skirt and Brim

I’ve set my skirt layer height to 0 layers, which effectively turns it off. If you’re not 100% confident in the levelness of your bed, using a skirt can give you a few seconds to nudge your Z-axis before the main body of the print begins. A brim will apparently help your print stick, but I haven’t had to use one yet. Hot PLA and a level platform goes a long way towards sticking to painters’ tape.

Support Material

I try hard to design models that print without support, so I’m not a good source for information on this setting. Keep it off unless you’re printing something that needs it. I keep the raft layers set to 0 as well; no sense in printing more than we have to if things are sticking to the platform anyways.

Filament Settings

Even though your Simple ships with 1.75mm filament, somewhere in a Printrbot setup guide I recall reading that you should set this to 1.70mm. Sure, whatevs.

I’m printing with PLA at 200° for the first layer and 190° for subsequent layers. Go much hotter than 210° and the PLA that printrbot shipped with the Simple starts getting liquid. This seems to work for loading the hot end, but I wouldn’t want to try and print with liquefied PLA.

Printer Settings

I’ve set my Simple to have a 100x100mm build platform, since most of what I’m trying to print is tiny and I usually end up manually homing the printer anyway.